Intramolecular Charge Transfer Research Articles

Intramolecular Charge Transfer and Stimuli-Responsive Emission in Cholesterol-Appended Phenothiazine-Cyanostyryl-Based Donor-Acceptor Systems.

Organic fluorescent molecules have received considerable attention owing to their various optoelectronic applications. Herein, we report the design and synthesis of two cholesterol-functionalized cyanostyrene-phenothiazine-based D-π-A systems that are emissive in both the solution and solid states. The newly synthesized cholesterol-appended phenothiazine-cyanostyrene diads PTCS-1 and PTCS-2 vary in the N-alkylation of phenothiazine, respectively, with─octyl and─hexyl chains. Both molecules are highly fluorescent and show reasonably good quantum yields in nonpolar solvents because of twisted intramolecular charge transfer (TICT). The molecules exhibit aggregation-induced emission in the solid state. Due to the presence of flexible alkyl chains in the phenothiazine and cholesterol moieties, PTCS-1 and PTCS-2 show mechanochromic luminescence switching in response to external shear stress and emission recovery under methanol vapor. Powder X-ray diffraction studies prove that the emission switching on the applied stimuli in both PTCS-1 and PTCS-2 is attributed to the reversible transformation between the crystalline and amorphous states. Time-dependent density functional theory (TD-DFT) studies are carried out to gain insight into the ICT interactions. TD-DFT analysis at the TD-M06-2X/def2-TZVP level further revealed that in both molecules, the lowest unoccupied molecular orbital (LUMO) + 2, LUMO, highest occupied molecular orbital (HOMO), and HOMO - 1 orbitals are responsible for the charge transfer interactions. These ICT interactions are identified as π-π* type interactions.

Tuning Intramolecular Charge Transfer in Antimony(V) Porphyrin through Axial Fluorination

Tuning Intramolecular Charge Transfer in Antimony(V) Porphyrin through Axial Fluorination

A Ratiometric Green Fluorescent Carbazole-bis(hydrazinobenzothiazole) Probe for the Selective Detection of Toxic Hg2+ Ions in Real Water Samples.

A dyad Carbazolyl-bis(hydrazinobenzothiazole) was designed to form a symmetrical structure that containing two-arm active binding sites facilitates coordination with Hg2+ ion. This sensor has imparted a colorimetric and fluorometric changes in presence of Hg2+ ions. The ligand showed a selective blue shift in presence of Hg2+even in co-existence with heavy metal ions with luminescence change from colorless to blue and colorless to green under day light. Enhanced Intramolecular charge transfer process is responsible for fluorescence transformation when ligand interacts with Hg2+ ion. The emission spectra showed a ratiometric response to increasing addition of Hg2+ ions. The sensor is capable of detecting above the lower concentration of 6.8025 × 10-8 M. The fluorescence efficiency of CBT-2 with Hg2+ ion is quite stable under different co-metal ions and wide range of pH 6 to 9. The sensor CBT-2 forms a 1:1 stoichiometric complex with Hg2+ ions and the binding nature is confirmed from the 1H-NMR, FTIR, and mass spectroscopic studies. The sensor CBT-2 and its Hg2+ complex possess good binding nature to protein in Bovine Serum Albumin which could be good in biological applications. Additionally, wedevelop a practical application in real water sample analysis and electrochemical detection viaoxidation potential discrimination.

Probing Alzheimer's pathology: Exploring the next generation of FDDNP analogues for amyloid β detection

Fluorescent probes are a powerful tool for imaging amyloid β (Aβ) plaques, the hallmark of Alzheimer’s disease (AD). Herein, we report the synthesis and comprehensive characterization of 21 novel probes as well as their optical properties and binding affinities to Aβ fibrils. One of these dyes, 1Ae, exhibited several improvements over FDDNP, an established biomarker for Aβ- and Tau-aggregates. First, 1Ae had large Stokes shifts (138–213 nm) in various solvents, thereby reducing self-absorption. With a high quantum yield ratio (φ(dichloromethane/methanol) = 104), 1Ae also ensures minimal background emission in aqueous environments and high sensitivity. In addition, compound 1Ae exhibited low micromolar binding affinity to Aβ fibrils in vitro (Kd = 1.603 µM), while increasing fluorescence emission (106-fold) compared to emission in buffer alone. Importantly, the selective binding of 1Ae to Aβ1–42 fibrils was confirmed by an in cellulo assay, supported by ex vivo fluorescence microscopy of 1Ae on postmortem AD brain sections, allowing unequivocal identification of Aβ plaques. The intermolecular interactions of fluorophores with Aβ were elucidated by docking studies and molecular dynamics simulations. Density functional theory calculations revealed the unique photophysics of these rod-shaped fluorophores, with a twisted intramolecular charge transfer (TICT) excited state. These results provide valuable insights into the future application of such probes as potential diagnostic tools for AD in vitro and ex vivo such as determination of Aβ1–42 in cerebrospinal fluid or blood.

Bidirectional π − π stacking for near-infrared photothermal effects and photo-thermo-electric conversion in a semiconductive hydroxamate coordination polymer

Photo-thermo-electric conversion is an emerging technology for utilizing solar energy. As the main component, photothermal materials play a significant role in achieving high conversion efficiency from sunlight to electrical energy. Organic photothermal materials have attracted intense attention recently due to their excellent photothermal efficiency and recycling capabilities. However, broad sunlight absorption in organics heavily relies on the realization of intramolecular or intermolecular charge transfer. Exploring more versatile and efficient methods to construct materials with broad sunlight absorption remains a great challenge. Herein, we report a novel photothermal compound from the perspective of modulating molecular assembly structure. By combining two distinct metal ions, Ba2+ and Mn2+, with the planar ligand H2ONDI, a new coordination polymer, {[BaMn(ONDI)2(H2O)3]⋅H2O}n (1), can be obtained. This coordination polymer exhibits rare bidirectional π−π stacking columns along both the a and b axis. The tightly bidirectional arrangement of ligands in 1 results in a broad optical absorption from the ultraviolet region to the near-infrared area, leading to intriguing near-infrared photothermal effects under irradiation of a laser of 808 nm with a efficiency of 42.3 %. By integrating with thermoelectric devices, 1 shows good application potential in the field of photo-thermo-electric conversion, with the maximum open circuit voltage reaching 313 mV under the irradiation of 1 sun. Furthermore, 1 displays semiconducting behavior because the presence of bidirectional π−π stacking columns facilitates charge transport along two directions, including hopping and band-like charge transport.

An activatable fluorescence probe for rapid detection and in situ imaging of β-galactosidase activity in cabbage roots under heavy metal stress

β-Galactosidase (β-gal), an enzyme related to cell wall degradation, plays an important role in regulating cell wall metabolism and reconstruction. However, activatable fluorescence probes for the detection and imaging of β-gal fluctuations in plants have been less exploited. Herein, we report an activatable fluorescent probe based on intramolecular charge transfer (ICT), benzothiazole coumarin-bearing β-galactoside (BC-βgal), to achieve distinct in situ imaging of β-gal in plant cells. It exhibits high sensitivity and selectivity to β-gal with a fast response (8 min). BC-βgal can be used to efficiently detect the alternations of intracellular β-gal levels in cabbage root cells with considerable imaging integrity and imaging contrast. Significantly, BC-βgal can assess β-gal activity in cabbage roots under heavy metal stress (Cd2+, Cu2+, and Pb2+), revealing that β-gal activity is negatively correlated with the severity of heavy metal stress. Our work thus facilitates the study of β-gal biological mechanisms.

Concerning for the solvent-polarity-dependent conformational equilibrium and ESIPT mechanism in Pz3HC system: A novel insight

In this report, we propose a new insight into the interaction between the solvent-polarity-dependent conformational equilibrium and excited state intramolecular proton transfer (ESIPT) behavior of Pz3HC system in four different polar solvents (polarity order: ACN > THF > TOL > CYC). Using quantum chemistry method, we first announce a coexistence mechanism between Pz3HC-1 and Pz3HC-3 in the ground state in four solvents based on the Boltzmann distribution. In particular, Pz3HC-1 is the principal configuration in non-polar solvent, but Pz3HC-3 is the principal configuration in polar solvent. In addition, the simulated fluorescence spectra interprets the negative solvatochromism effect of Pz3HC-1 and Pz3HC-3 in four solvents. The evidence from intramolecular hydrogen bonding (IHB) parameters and electronic perspective collectively confirms the light-induced IHB enhancement and intramolecular charge transfer (ICT) properties in Pz3HC-1 and Pz3HC-3, which raises the likelihood of the ESIPT process. Combining the calculation of potential energy curve (PEC) and intrinsic reaction coordinate (IRC), we demonstrate that the ESIPT ease of Pz3HC-1 in different polar solvents obeys the order of CYC > TOL > THF > ACN, while the order of ESIPT ease in Pz3HC-3 is opposite. Notably, the ESIPT process of Pz3HC-3 in CYC solvent is accompanied by the twisted intramolecular charge transfer (TICT) process. In addition, we also reveal that the enol* and keto* fluorescence peaks of Pz3HC-3 in CYC solvent are quenched by ISC and TICT process, respectively. Our work not only provides a satisfactory explanation of the novel dynamics mechanism for Pz3HC system, but also brings light to the design and application of new sensing molecules in the future.

Sp2-c linked Cu-based metal-covalent organic framework for chemical and photocatalysis synergistic reduction of uranium

The reduction of hexavalent uranium to tetravalent uranium is an effective strategy for controlling uranium contamination in wastewater. Herein, a CC bonded metal-covalent organic framework (Cu-TMT) was synthesized via the Aldol condensation reaction by using the metal cluster Cu3(PyCA)3 and 2,4,6-trimethyl-1,3,5-triazine (TMT) for the chemical and photocatalytic synergistic reduction of uranium. In the Cu-TMT, the low-valent Cu in the metal clusters provides the framework with numerous distributed redox sites being capable of chemically reducing UVI. Meanwhile, the encapsulating Cu clusters in long-range ordered frameworks can provide fast transport channels for intramolecular charge transfer and effectively inhibit electron/hole complexation, making Cu-TMT suitable for photocatalytic reduction of uranium. The chemical reduction of uranium by Cu-TMT was verified under light-avoidance conditions, reaching 659.5 mg g−1. After exposure of Cu-TMT to light, the amount of reduced uranium further increases to 1438.8 mg g−1 with 98.1 % removal rate of actual uranium containing wastewater. This study not only expands the range of applications of variable valence metal covalent organic frameworks, but also provides unique insights into the effective combination of chemical and photocatalytic reduction strategies for removing UVI in a single material.

Dual function Schiff-base as a selective fluorescence “Turn-on” sensor for Zn2+ and a colorimetric sensor for Cu2+ and Fe3+ ions

A simple and adaptable salen-based Schiff base receptor (L = 6,6′-((1E,1′E)-(cyclohexane-1,2-diylbis(azanylylidene))bis(methanylylidene))bis(2-methoxyphenol))was employed in the current study for colorimetric detection of Cu2+, Fe3+, and fluorescence detection of Zn2+ ions in a semi-aqueous solution. L could identify the three target ions among the many different cations and anions in the solution. The turn-on fluorescence signal of L to Zn2+ ions was boosted by the restriction of the intramolecular charge transfer process, and the resulting chelation enhances the fluorescence signal. The sensing mechanisms were validated using a Job’s plot, Electrospray Ionization Mass Spectrometry (ESI-MS) analysis, Nuclear Magnetic Resonance (NMR) titration experiment, and theoretical calculation investigations. The detection limits for Zn2+ were determined to be 0.038 μM, whereas Cu2+ and Fe3+ detection limits were 0.58 μM and 0.62 μM, respectively. Next, L was used to develop solid silica gel and test strips for instantaneous colorimetric and fluorescent detection of the three target ions in real time. The trace level of Cu2+ and Fe3+ in the tap and drinking water samples could be quantitatively measured using L. Eventually, applications for keypad locks and molecular logic gates were developed utilizing the receptor L.

Preparation of NIR-II Polymer Nanoprobe Through Twisted Intramolecular Charge Transfer and Förster Resonance Energy Transfer of NIR-I Dye.

Near-infrared-II (NIR-II) fluorescence imaging is pivotal in biomedical research. Organic probes exhibit high potential in clinical translation, due to advantages such as precise structure design, low toxicity, and post-modifications convenience. In related preparation, enhancement of NIR-II tail emission from NIR-I dyes is an efficient method. In particular, the promotion of twisted intramolecular charge transfer (TICT) of relevant NIR-I dyes is a convenient protocol. However, present TICT-type probes still show disadvantages in relatively low emission, large particle sizes, or limited choice of NIR-I dyes, etc. Herein, the synthesis of stable small-sized polymer NIR-II fluoroprobes (e.g., 7.2nm), integrating TICT and Förster resonance energy transfer process to synergistically enhance the NIR-II emission is reported. Strong enhanced emissions can be obtained from various NIR-I dyes and lanthanide elements (e.g., twelvefold at 1250nm from Nd-DTPA/IR-808 sample). The fluorophore provides high-resolution angiography, with high-contrast imaging on middle cerebral artery occlusion model mice for distinguishing occlusion. The fluorophore can be rapidly excreted from the kidney (urine ≈65% within 4h) in normal mice and exhibits long-term renal retention on acute kidney injury mice, showing potential applications in the prognosis of kidney diseases. This development provides an effective strategy to design and synthesize effective NIR-II fluoroprobes.

Semiconducting Polymers Based on Asymmetric Thiadiazoloquinoxaline for Augmented In Vivo NIR-II Photoacoustic Imaging.

A photoacoustic (PA) imaging technique using the second near-infrared (NIR-II) window has attracted more and more attention because of its merits of deeper penetration depth and higher signal-to-noise (S/N) ratio than that using the first near-infrared (NIR-I) one. However, the design and development of high-performance PA imaging contrast agents in the NIR-II window is still a challenge. A semiconducting polymer, constructed by asymmetric units, exhibits regiorandom characteristics that effectively increase the distortion of the backbone. This increase in the degree of twist can regulate the twisted intramolecular charge transfer (TICT) effect, resulting in an enhancement of the PA signal. In this paper, an asymmetric structural acceptor strategy is developed to improve the PA signals of the resulting semiconducting polymer (PATQ-MP) in the NIR-II window with improved brightness, higher S/N ratio, and better photothermal conversion efficiency compared to polymers with the same main-chain structure containing a symmetric acceptor. DFT analysis showed that PATQ-MP containing an asymmetric acceptor monomer had a larger dihedral angle, which effectively improved the PA signal intensity by enhancing the TICT effect. The PEG-encapsulated PATQ-MP nanoparticles exhibit promising performance in the PA imaging of mouse tumors in vivo, demonstrating the clear identification of microvessels as small as 100 μm along with rapid metabolism within a span of 5 h. Therefore, this work provides a unique molecular design strategy for improving the signal intensity of PA imaging in the NIR-II window.

Orbital-Optimized Versus Time-Dependent Density Functional Calculations of Intramolecular Charge Transfer Excited States.

The performance of time-independent, orbital-optimized calculations of excited states is assessed with respect to charge transfer excitations in organic molecules in comparison to the linear-response time-dependent density functional theory (TD-DFT) approach. A direct optimization method to converge on saddle points of the electronic energy surface is used to carry out calculations with the local density approximation (LDA) and the generalized gradient approximation (GGA) functionals PBE and BLYP for a set of 27 excitations in 15 molecules. The time-independent approach is fully variational and provides a relaxed excited state electron density from which the extent of charge transfer is quantified. The TD-DFT calculations are generally found to provide larger charge transfer distances compared to the orbital-optimized calculations, even when including orbital relaxation effects with the Z-vector method. While the error on the excitation energy relative to theoretical best estimates is found to increase with the extent of charge transfer up to ca. -2 eV for TD-DFT, no correlation is observed for the orbital-optimized approach. The orbital-optimized calculations with the LDA and the GGA functionals provide a mean absolute error of ∼0.7 eV, outperforming TD-DFT with both local and global hybrid functionals for excitations with a long-range charge transfer character. Orbital-optimized calculations with the global hybrid functional B3LYP and the range-separated hybrid functional CAM-B3LYP on a selection of states with short- and long-range charge transfer indicate that inclusion of exact exchange has a small effect on the charge transfer distance, while it significantly improves the excitation energy, with the best-performing functional CAM-B3LYP providing an absolute error typically around 0.15 eV.

Fluorescent Schiff Bases with Phenothiazine and Coumarin Moieties: Synthesis, Characterization, Photophysical, Electrochemical, Computational and Biological Studies.

We present the design and synthesis of four new schiff bases viz., two each of phenothiazine and coumarin derivatives. The structures were proposed based on FT-IR, 1H NMR, 13C NMR and mass spectral data. The photophysical, solvatochromic and electrochemical studies of all the compounds were carried out. Furthermore, theoretical studies such as density functional theory (DFT) were carried out to gain a better understanding of the compounds' intramolecular charge transfer properties and electronic structures. Good agreement was noticed between the HOMO-LUMO energy gap obtained from DFT studies and that calculated from absorption threshold wavelengths. All the compounds showed Stokes shifts in the range of 6345-11,405cm-1. These findings showed that the new schiff bases could be considered as attractive candidates for use in the development of OLEDs, organic electrical devices and optoelectronic devices. Newly synthesized compounds were tested for biological activities. When compared to conventional standards, gallic acid and indomethacin, the schiff bases showed better antioxidant and antiinflammatory activities, respectively.

Fast and easy detection of hypochlorite by a smartphone-based fluorescent turn-on probe: Applications to water samples, zebrafish and plant imaging

We have developed a fluorescent probe DBT-Cl ((E)-2-(2-(4-(diphenylamino)benzylidene) hydrazinyl)-N,N,N-trimethyl-2-oxoethan-1-aminium chloride) for ClO− with an aggregation-induced emission (AIE) strategy depending on solvent polarity. DBT-Cl possessed a prominent solvatochromic emission property with intramolecular charge transfer (ICT) from the TPA (triphenylamine) to the amide group, which was studied by spectroscopic analysis and DFT calculations. These unique AIE properties of DBT-Cl led to the recognition of ClO− with high fluorescent selectivity. DBT-Cl quickly detected ClO− in less than 1 sec with a fluorescent color change from green to cyan. DBT-Cl had a low detection limit of 9.67 μM to ClO−. Detection mechanism of DBT-Cl toward ClO− was illustrated to be oxidative cleavage of DBT-Cl by 1H NMR titrations, ESI-mass, and DFT calculations. We established the viability for dependable detection of ClO− in actual water samples, as well as zebrafish and plant imaging. In particular, DBT-Cl was capable of easily monitoring ClO− through a smartphone application. Therefore, DBT-Cl assured a promising approach for a fast-responsive and multi-applicable ClO− probe in environmental and living organism systems.

Alkaline phosphatase activatable near-infrared fluorescent probe for in-situ diagnosis of cholestatic liver injury

Cholestatic liver injury (CLI) is a clinical syndrome caused by impaired bile excretion and is almost asymptomatic in early-stage. If CLI is not recognized timely, it will elicit more severe liver diseases. Therefore, earlier diagnosis of CLI is urgently needed but remains challenging. On the basis of the consensus that elevation of serum alkaline phosphatase (ALP) is the most susceptible indicator of earlier cholestatic diseases. Herein, we conjugated dicyanoisophorone with hydroxyl-substituted coumarin derivative to afford an intramolecular charge transfer (ICT)-based fluorophore TX-OH, and successfully constructed an enzyme activatable fluorescent probe TX-PS, which enables specifically detecting ALP with near-infrared emission (720nm), large stokes shift (198nm) and excellent linear relationship (R2 = 0.9969) between fluorescence intensity and the concentrations of ALP (0-100U/L). Moreover, TX-PS exhibits applicable for imaging of ALP activities in living cells and zebrafish with ignorable toxicity and shows great potential to visually screen ALP inhibitors. Importantly, the liver tissues from CLI mice displayed remarkably higher fluorescence intensity than that from normal mice, suggesting the valuable capability of TX-PS for evaluating CLI degree. Overall, this work affords a powerful tool for earlier diagnosis of CLI and high-throughput screening of ALP inhibitors or new drugs for CLI therapeutics.

Precise synthesis of three-arm star polymethacrylates with high emission efficiency both in solution and in the solid state

Organic/polymeric fluorescent materials with bright emission both in solution and in the solid state have garnered growing interest in biological and optoelectronic fields. Herein, triphenylamine-derived boron ketoimine (TPA-BKI-3Br) was utilized as the initiator for atom transfer radical polymerization (ATRP) to prepare dual-state emission three-arm star polymethacrylates. Due to the intramolecular charge transfer (ICT) effect and highly distorted structure of the TPA-BKI unit, as well as the polymer arms constraining intramolecular motions, the resultant polymers displayed significant emission in solution. In the aggregated and solid states, the photophysical characteristics of the resultant polymethacrylates were notably impacted by the space charge transfer between the TPA-BKI unit and polymer chains. In addition, the TPA-BKI-based poly(2-(dimethylamino)ethyl methacrylate) (TPA-BKI-(PDMAEMA)3) exhibited fluorescence responses to temperature variations owing to the presence of dimethylamino group. This study presents an approach for the advancement of dual-state emission polymeric materials.

A turn-on fluorescent probe based on pyrene for hydrazine detection

This paper presents a novel fluorescent probe (GNEM) based on a pyrene fluorophore, with dicarboximide as the recognition unit for hydrazine. The fluorescence probe can be synthesized in a simple one-step process. A highly selective and sensitive fluorescence turn-on GNEM synthesized. GNEM react with hydrazine through nucleophilic addition, leading to the deprotection of dicarboximide and the release of dicarboximide hydrazine, resulting in significant blue fluorescence. This enhanced emission is attributed to the intramolecular charge transfer (ICT) sensing mechanism of GNEM. In addition, detection of hydrazine in soil and water is conducted. By designing a simple detection device, the hydrazine content in the air can be quantitatively measured.

A near-infrared fluorescent probe with thiadiazole unit as key skeleton for ICT and ESIPT mechanism and effective detection of Cu2+

Fluorescent probe L-I was synthesized to demonstrate that 1,3,4-thiadiazole is an attractive moiety and could be utilized as positive hydrogen bond acceptor for excited state intramolecular proton transfer (ESIPT) processes, guider of electrons movement for intramolecular charge transfer (ICT) process and identify group for mental ions. Furthermore, dicyanoisophorone framework was employed to improve the fluorescence characteristics and near-infrared (NIR) fluorescent emission at 695 nm accompanied by a Stoke's shift as large as 260 nm was obtained. L-I could selectively detect Cu2+ over other analytes taking advantages of high sensitivity, fast response within 30 s and low detection limit (0.026 μM). More important, L-I exhibited good performance for detection of Cu2+ in actual water samples, food products, traditional Chinese medicine and for cell imaging which demonstrates practical significance in the fields of environmental monitor, food safety and biotechnology.

Near-infrared imaging of acute pancreatitis with a pancreatic lipase-monitoring fluorescence probe

Acute pancreatitis (AP) is an acute inflammation of the pancreas, which is accompanied by necrotizing inflammatory response and tissue edema. As a vital enzyme secreted by pancreas, pancreatic lipase (PL) has been established that the increase of its expression is closely related to the prevalence and seriousness of AP. Therefore, there is an urgent need to develop efficient tools for detecting the fluctuation of PL in AP, which will promote understanding of the physiological and pathological effects of AP. In this work, we firstly report an intramolecular charge transfer (ICT)-based near-infrared (NIR) fluorescence probe, NIR-PLP, which featured excellent selectivity, sensitivity, and high biocompatibility. Moreover, the NIR-PLP was successfully used to detect the fluctuation endogenous PL in AP cell model respectively caused by L-arginine and caerulein, and further evaluated fluorescence enhancement triggered by exogenous PL in zebrafish. Most importantly, we successfully achieved in situ monitoring of PL increased in AP mouse model induced by L-arginine with the assistance of probe NIR-PLP. These findings indicate the potential clinical utility of using the NIR-PLP probe to investigate the occurrence, progression, and treatment of AP.

Excited-state properties of Cu-TADF complexes: A density functional theory study

Organometallic complexes, including copper atom, have attracted great interest as thermally activated delayed fluorescence (TADF) emitters for light emitting diode (LED) applications. This is ascribed to the potential low-cost, abundant availability of copper and most importantly to the ability of copper to enhance the spin–orbit couplings and, consequently, increase the reverse intersystem crossing rates. In this article, we use density functional theory (DFT) to investigate the excited state properties of six copper complexes based on N-heterocyclic carbene ligand, monoamido-amino carbene and diamido carbene, and carbazole ligand. The DFT calculations show that the lowest excited states consist of three groups, i.e., (i) local carbazole excitations, (ii) carbazole-to-carbene intramolecular charge transfer states, and (iii) metal-to-ligand charge transfer states. Only the latter states are characterized with large spin–orbit couplings. The DFT calculations show that the surrounding medium could have a major effect on electronic spectrum by reordering the states. Our results suggest that the TADF properties of the investigated complexes can be affected by the chemical structure of the ligands as well as by the dielectric properties of the LED device active layer.